- #Driron fagor manual update
- #Driron fagor manual software
- #Driron fagor manual code
Therefore, except under the express permission from Fagor Automation, any CNC application that is not described in the documentation must be considered as "impossible". It is possible that CNC can execute more functions than those described in its associated documentation however, Fagor Automation does not guarantee the validity of those applications.
13.2 Freezing the angular transformation. 13.1 Turning angular transformation on and off. 12.7 Interruption-subroutine instructions. 11.2.18 Operating-mode related variables. 11.2.17 Variables associated with telediagnosis. #Driron fagor manual software
11.2.16 Software & hardware configuration variables. 11.2.14 Variables associated with local parameters. 11.2.12 Variables associated with the live tool. 11.2.11 Variables associated with the second spindle. 11.2.10 Variables associated with the main spindle. 
11.2.9 Variables associated with feedback.11.2.8 Variables associated with electronic handwheels.11.2.7 Variables associated with coordinates.11.2.6 Variables associated with feedrates.11.2.5 Variables associated with work zones.11.2.4 Variables associated with machine parameters.11.2.3 Variables associated with zero offsets.11.2.2 Variables associated with tools.
11.2.1 General purpose parameters or variables.Canned cycle for part measuring and tool correction on the Z axis Canned cycle for part measuring and tool correction on the X axis Slot milling canned cycle on the face of the part Slot milling canned cycle on the side of the part Radial drilling/ tapping (on the side of the part)
Facing canned cycle for straight sections Turning canned cycle for straight sections
8.2.8 Change of type of tool radius compensation while machining. 8.2.7 Temporary cancellation of tool compensation with G00. 8.2.6 Cancellation of tool radius compensation (G40). 8.2.5 Sections of tool radius compensation. 8.2.4 Beginning of tool radius compensation (G41, G42). 8.2.3 Working with tool radius compensation. 8.2.2 Working without tool radius compensation. #Driron fagor manual code
8.2.1 The location code of the tool (tool type). 7.7.2 Cancellation of the electronic axis coupling, slaving, (G78). 7.7.1 Electronic axis coupling, slaving, (G77). 7.7 Electronic axis coupling/uncoupling. 7.6.2 Scaling factor applied to one or more axes. 7.6.1 Scaling factor applied to all axes. 7.3 Working with square (G07) and round (G05,G50) corners. #Driron fagor manual update
7.1.1 G04 K0: Block preparation interruption and coordinate update. 7.1 Interruption of block preparation (G04). Temporary cancellation of tangential control 6.18.1 Considerations about the G45 function. 6.17 Feedrate "F" as an inverted function of time (G32). 6.15.2 Machining on the face of the part. 
6.15.1 Machining on the side of the part. 6.13 Withdrawal of axes when interrupting a threading operation (G233). 6.9 Tangential exit at the end of a machining operator (G38). 6.8 Tangential entry at the beginning of a machining operation (G37). 6.4 Circular interpolation with absolute arc center coordinates (G06). End of program with return to the first block 5.6 Tool number (T) and tool offset (D). 5.5 Synchronized spindles (G30, G77S, G78S). 5.2.2 Feedrate in mm/rev.or inches/rev (G95). 5.2.1 Feedrate in mm/min or inches/min (G94). 4.4.1 Coordinate preset and S value limitation (G92). 4.3 Programming with respect to machine zero (G53). 4.2 Machine reference (Home) search (G74). 3.5 Programming in radius or in diameters (G152, G151). 3.4 Absolute/incremental programming (G90, G91). 1.3 Communication protocol via DNC or peripheral device. 1.1.1 Considerations regarding the Ethernet connection.
0 kommentar(er)
